Translation of the original operating manual
Drive unit for flexible shafts
– MB 50
OI NO.: 001 580 674
- 5 - of -16-
Version 16.01.2020
GB
power tool is impaired. Have damaged parts repaired before using the power tool.
Many accidents
are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Carefully maintained cutting tools with sharp cutting edges jam less
and are easier to guide.
g)
Use power tools, insert tools, etc. according to these instructions. Take into account the working
conditions and the activity to be carried out.
The use of power tools for applications other than those
specified can lead to dangerous situations.
h)
Keep handles and grip surfaces dry, clean and free of oil and grease.
Slippery handles and gripping
surfaces do not allow safe operation and control of the power tool in unforeseen situations.
5) Service
a)
Have your power tool repaired only by qualified personnel and only with original spare parts.
This
ensures that the safety of the power tool is maintained.
4.3 Machine-related Safety Instructions
WARNING
There is a risk of severe personal injury if the safety information is ignored!
Sparks or chippings can be produced during grinding which could injure the eyes.
Always wear protective goggles while completing the work!
The noise level specified can be exceeded during some working processes.
Wear ear protection!
Always wear respiratory protection when performing work which produces dust and
switch on the dust extraction system at the work location!
Danger of injury from sharp components!
Wear appropriate safety gloves when working!
Danger from snagging and pulling in hair!
Wear a hairnet!
Defective electrical equipment should not be disposed of in domestic waste! Dispose
of the equipment in an environmentally-friendly manner!
4.4 Health
CAUTION
– Health disorders!
Vibrations can be transmitted over the entire body, particularly to the arms and hands.
Very strong or continuous exposure to vibration can cause nerve and blood vessel
disorders!
DANGER
– Electricity!
Risk of fatal injury by touching live parts.
Work on electrical equipment must only be carried out by authorised electrical experts.
Do not carry out any work on live parts.
