bianco dipuro VOLTO, Руководство пользователя

Страница: 9 / 37

16 17
OPERATING VOLTO MANUAL MODE
Manual Mode
In addition to the 8 preset programs, you can operate the VOLTO in manual mode. The mixer must be in
the standby mode (the program icons, the On / Off button and Pulse button lights in white). By turning the Speed control
switch (see fig. Page 12) to the right, the motor will start immediately in the lowest speed (stage 1). Turn the switch now to
the right, as you gradually increase the speed level. Turning the switch to the left to reduce the speed gradually. In manual
mode, this can be done even during operation.
Exit manual mode
Exit manual mode by pressing the On / Off button or by turning the speed control switch back completely to the left at level
00.
Note
In manual mode, the mixer remains in operation until it is manually stopped.
During operation, the elapsed time is displayed on the display.
Speed Adjustment
The speed can be set from level 1 to level 10 with the speed control switch.
The selected speed setting is displayed as followed:
„1, 2, 3, 4, 5, 6, 7, 8, 9, 10“.
Speed
The speed depends on the speed level you select. Below you find the corresponding speed each level.
Each level runs smoothly and later as followed:
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Level 8 Level 9 Level 10
1,500
4,000 5,000 6,000 7,000 24,000 26,000 28,000 30,000 32,000 (approximate rpm / min.)
Power Compensation System in speed levels 1-5
In mixing of solid foods (e.g. Pastry, nut butters, etc.), the power compensation system will continuously monitor and adjust
the power automatically. This will ensure the mixing content is optimally processed.
Under this automatic system, a dynamic speed may be noticed when mixing softer food in speed level 1-5.
This is not a fault, it is a part of the auto system performance.
OPERATING THE TAMPER
Run the tamper only through the lid opening of the measuring beaker. (see Fig. 2, page 1). Use only the provided tamper
and NO OTHER objects to press the mixing content towards the blades. The less water you use, the more you have to work
with the tamper. If you use other objects, the device can be damaged.
Overview
With the aid of the tamper you can remove any air bubbles, e.g. when preparing dough, in the mixing container, without
touching the blades. With the integrated temperature gauge you can make sure your foods are prepared gently.
To measure the temperature in the mixing container, please proceed as follows:
• Switch on the tamper with the On/Off button
• Take the measuring beaker off the lid, leave the lid on the mixing container.
• Now hold the tamper into the mixing container through the opening.
• The handle of the tamper displays the temperature in °C
Note
If the display shows the temperature in °F (Fahrenheit),
you can change into °C (Celsius) by holding the On/Off button of the tamper.
Changing battery
(Battery type: CR 2032)
• Unscrew the upper part of the housing by turning it anti-clockwise.
• Now carefully pull out the display from the tamper.
• Remove the old battery and insert a fresh battery.
• Place the display into the grip and screw the upper part of the housing tight.
Dispose of the used old battery at the provided collection points
Temperature
On/Off button