EN
EN
16
17
Operating the Tamper TL
Operating
VERDE
Manual Mode
Manual Mode
Rotate the position indicator of the jog dial to stop position. Now turn the jog dial to
the right to select the manual mode in the speed level 1 to start. The motor will start
immediately in level 1. You can change the speed between the level 1 to 10 during
operation.
Exit manual mode by pressing the
Pulse ON / OFF button
, the motor will stop
IMMEDIATELYANDTHEINDICATORLIGHTßASHESRED4OCONTINUEWITHFURTHERPREPERATIONYOU
turn the jog dial in the stop position and then select the desired speed level again or one
of the preset programs.
You can also exit manual mode by rotating the jog dial to the left to the stop position.
Please note, you can also turn the blender on and off during manual mode, using the
Pulse ON / OFF button.
Pulse Mode
By pressing and holding the pulse button the blender operates at the highest speed
level. Stop the Pulse mode by releasing the pulse button. The Jog Dial must be in the
stop position to operate. During the Pulse mode, the status light is solid white.
Remove the mixing container only when the blades do not rotate anymore!
2UNTHETAMPERONLYTHROUGHTHELIDOPENINGOFTHEMEASURINGBEAKER SEE&IG
PAGE5SEONLYTHEPROVIDEDTAMPERAND.//4(%2OBJECTSTOPRESSTHEMIXING
CONTENTTOWARDSTHEBLADES4HELESSWATERYOUUSETHEMOREYOUHAVETOWORKWITH
THETAMPER)FYOUUSEOTHEROBJECTSTHEDEVICECANBEDAMAGEDIRREPARABLY
With the aid of the tamper you can remove any air bubbles, e.g. when preparing dough,
in the mixing container, without touching the blades. With the integrated temperature
gauge you can make sure your foods are prepared gently.
7HENUSINGTHETAMPERPLEASEÞRMLYHOLDTHEBASEOFTHEMIXINGCONTAINERWITHA
free hand.
Note:
Please note that the tamper TL must only be used in conjunction with the lid. Using
the tamper without the lid can damage the tamper, engine block, and the mixing
container.
Note:
The sticker illustrates the correct usage for the tamper. Please do not remove.
