21
VEGA
Fig. 7.8
7.2.5 OPTIONS (Fig.7.8)
This function makes a series of options available in sequence as
listed below. Use the ENTER key to go to the sub-menu where the
first option is displayed.
For every OPTION it is necessary to set the logical status ON or
OFF which enables operation or not as the case may be.
Validator
= coin box engagement G13 [On/Off]
Credit timeout
= recovers credit if the drink delivery fails
(Vega) [On/Off]
Perman. Credit
= engages credit timeout lasting 3 minutes
[On/Off]
Executive
= Executive coin box
MDB coin box
= MDB coin box activation (coins only)
(ON/OFF)
Multi-sales
= option for the selection of residual credit
visualization for 3 minutes (ON), or zeroing
of the same at the end of the dispensing
operation (OFF)
Machine number
= Machine number (0÷999999)
Rental number
= Rental number (0÷65535)
Language
= language used for showing messages on
the display
Machine type*
= option for choosing the machine. Models
available:
Snk
= for SNACK and COMBINED versions
Pan
= for versions with perishable products (VEGA 850 -
VEGA 700)
Decimal point
= display the amount with a decimal point
(00000, 0000.0, 000.00, 00.000)
Code
= new programming access code
(00000÷99999)
*
the Pan configuration allows lower working temperatures to be
used (see temperature menu), alarm signalling and spiral
locking with perishable products (sel. 51 to sel. 68 for VEGA
850, sel. 51 to sel. 56 for VEGA 700).
Use the + and - keys to vary the logical data such as the
status from yes (ON = enabled) to no (OFF = disabled) or the
digit +, - keys to vary the numeric values.
Press ENTER to confirm the value set and the next option appears
on the display. Press ESC to return to the OPTIONS menu.
- The MDB coin box has priority over the other coin boxes,
followed by Executive and then G13.
- The Perman credit parameter only functions if Multi-sales
is engaged.
- The Credit timeout and Permanent credit are only active
with coin and G13.
- The Multi-sales parameter is not active with executive coin
box.
- The last 4 languages may be selected only if the additional
eprom on card is inserted.
- The Decimal point parameter is not displayed if the executive
or MDB coin boxes are engaged.
