BIANCHI VENDING BVM951, Руководство по эксплуатации и обслуживанию

Страница: 40 / 62

40
5.1.13 Menu ‘Decounter and Reserves’
Decount powder? yes/No (If “yes” it
requires the decount parameters
relevant to the powders. When
decount. = 0 supply disabled)
Decount sectors? Yes/No (If “Yes” it requires
the decount parameters relevant to the
sectors. When decount. = 0 preparation
disabled)
Decount Grain? Yes/No . If “Yes” it requires
the decount parameters relevant to the
coffee grain. When decount. = 0 pre-
paration disabled).It displays also Grain
reserve.
Decount Cups Yes/No . It displays also . If
“Yes” it requires the decount parameters
relevant to the decount cups. When
decount. = 0 preparation disabled). It
displays also cup reserve
Reserve powder? [On/Off] It enables the
management of the powder reserve .
Reserve Sectors? [On/Off] It enables the
management of the sector reserve.
Reserve beans? [On/Off] It enables the
management of the grain reserve.
Enable Reset? It enables the management
of the reset push button of decounter
under maintenance [On/Off]. At the con-
fi rmation moment of each decounter the
electronics will store, by duplicating them,
the values not decounted yet in safe me-
mory locations. Any time the operator will
start maintenance, through a dedicated
push button,he will be able to reset the
decounters to the initial parameter.
Dec. Powdwe 1 Powder decounter value 1
[0÷1677721s]
…
Dec. Powder 8 Powder decounter value 8
[0÷1677721s]
The decount value to be inserted in the Dec. Powder X is deter-
mined by measuring for each second of preparation the product
grammage supplied. The result must be multiplied by the total
H2 0 Volume in the container.
Example:
Chocolate 1sec = 4 g that is 1g = 0,25’sec
Chocolate in the container = 1000 g
Dec. Powder 8 = 1000g * 0,25sec = 250 sec
In WinBianchi there is a converter which will enable to insert grams
and the specifi c weight of the powder by obtaining the seconds
that will be set in the machine.
Dec. Sett/Coll XX Value of decounter Sector/Column XX[0÷25]
Dec. Beans Value of decounter relevant to coffe in beans
[0÷1677721s]
Dec. Cups Value of decounter relevant to cups[0÷1000]
Reserve powder 1 Value of the reserve relevant to the Dust 1
[0÷1677721s]
…
Reserve Powder 9 Value of the reserve relevant to powder 9
[0÷1677721s]
Reserve Beans Value of the reserve relevant to coffee in grain
[0÷1677721s]
5.1.14 Menu “Sales”
Tot. collected hot Unresettable Hot total amount
[0÷16777215]
Total collected Resettable hot total amount[0÷16777215]
Total Collected Cool U n r e s e t t a b l e t o t a l s n a c k a m o u n t
[0÷16777215]
Total snack R e s e t t a b l e t o t a l s n a c k a m o u n t
[0÷16777215]
Tot. Col. Not Eras Unresettable total amount [0÷16777215]
Total collected Resettable total amount [0÷16777215]
Discount Total discount sum of all discounts applicable
to a preparation [0÷16777215]
Overpay Tot Overpay – Amount cashed but not used
[0÷16777215]
Tot. Sel. not Eras. Payed unresettable total selections/Free/test
[0÷16777215]
Total selections Resettable total selections payed /Free/Test
[0÷16777215]
Reserve cups Value of the reserve relevant tot cups
[0÷1000]
Chip Card? [On/Off] Enable the management of the Chip
Card
Each chip-card, besides its data, has three types of stored codes:
machine, location and client codes.
When the chip-card code is inserted in the appropriate connector
a test is made to check that the codes on key coincide with the
machines ones.
The codes which are not on the chip card are not checked, therefore
if there is no code the test is not performed.
Moreover it is possible to perform sets on the chip-card (through
the windows programme), which enable to choose on which codes
to perform the test.
The chip-card Decounts is used to update the machine decounters
by adding to the residue value, the stored fi ll.
To be enabled to the operation the key must have besides the three
codes, if present (machine, location and customer) correct, also
the fi ll value other than zero and a key identifi cation code which
is not present in the stored list of the machine EPROM.
This list is updated through the code of the key used, at fi lling
operation correctly concluded.
Moreover, about this operation the cancellation of the two stored
decounter fi lling values to counter the possibility of a key re-use.
The key disabling through code save and fi ll cancellation is perfor-
med only when updating is correctly over.
The early key disconnection or a sudden voltage drop does not
prejudice the correct key operation; therefore when there is the
restoring of the normal operation condition (key inserted and stable
power supply) the operation will be correctly concluded.
Through CHIP CARD the decounters are always blocking. Without
it, they are signalling.