7
VOCIA AUXILIARY MICROPHONE 1 (VAM-1)
LED Indicators when used with VI-6
The VAM-1 has two bi-colour status LEDs visible when the microphone is lifted from the cradle. When connected to a VI-6 the following
LED indications are supported:
If the VAM-1 is indicating it is in an idle state a Page may be initiated by pressing the PTT switch. After the switch is pressed, the Wait and
Talk LED indicators will illuminate as follows:
• Wait LED Indicator: The LED will illuminate amber while the Paging Station or VI-6 is configuring the Page and/or playing a Preamble.
• Talk LED Indicator: The LED will illuminate green to indicate an anouncement is ready to be accepted.
Installation
The VAM-1 is suitable for surface mounting vertically on a wall or desk in portrait orientation. Note that the VAM-1 connector protrudes
into the mounting surface behind the unit. In addition, adequate space must be allowed behind the VAM-1 for accommodation of a mating
connector and cable.
VAM-1 Status
Busy LED
Talk LED
Idle
Green Pulse
Green Pulse
Page Setup in Progress
Amber
Off
Destination Zones In Use
Red Flash
Red Flash
Please Talk Now
Off
Green
Approaching End of Maximum Page Length
Off
Green Slow Flash
Maximum Page Length Exceeded
Red Flash
Red Flash
Message Playback Request Queued
Off
Green Flash
Message Playback Request Failed
Red Flash
Red Flash
