MS-1e Rear
1 - AC Power Entrance (IEC)
The IEC power entrance provides for connection of the appropriate power cord (included with unit). An
internal universal switching power supply accepts 100~240VAC @ 50/60Hz, with a maximum power
consumption of 350 watts.
CAUTION
Do not remove or defeat the ground prong on the power cord, as this will constitute a shock hazard. Equipment should be
connected to a mains socket outlet with a protective earthing connection. This plug is the main disconnecting device and should
remain readily operable. There are no user interchangeable parts. Please contact Biamp Technical Support or your local distributor
for all service requirements.
2 - RS-232 Port
This port is used to support console access to the MS-1e. This enables third party access to the Vocia
MS-VTP (Vocia Text Protocol) API. Please refer to the seperate VTP programmers document or the
software help file for more details.
3 - Network Connection
The MS-1e has four RJ45 Ethernet connectors located on the rear panel (Control, CobraNet, VoIP, and
Live Interworld Streaming). Each connector has two green LEDs, which display Ethernet Link (left LED)
and Activity (right LED).
LAN-1 Connector (Control)
This port connects the MS-1e to the Ethernet control network. This should be separate to the LAN that is
being used by the CobraNet port either physically or through the use of managed switches and VLANs.
The MS-1e can be configured in the Vocia software interface via this port, and as such it should be
connected to the same network as the configuration PC during set up. This connection supports
Interworld paging and communications. The default IP address of the MS-1e is 192.168.1.101.
LAN-2 Connector (CobraNet)
This port is used to communicate with non-server Vocia devices and as such should be connected to the
same network as the local Vocia system. The data from the CobraNet network should be placed on its
own LAN, either physically or through the use of managed switches and VLANs. Unlike other Vocia
devices, the MS-1e physical network port does not display LED indication of CobraNet status. By default
the MS-1e takes on the role of CobraNet conductor (time sync master).
LAN-3 Connector (VoIP)
This port is used to host VoIP paging functionality for the MS-1e. MS-1e VoIP paging is enabled at the
World level. Connection should be made to the same network as other VoIP infrastructure within the
facility. If Live Interworld Streaming is enabled (LAN 4) MS-1e VoIP paging functionality (LAN 3) will be
disabled at the Universe level.
LAN-4 Connector (Interworld)
This port is used for Live Interworld Streaming. Live Interworld Streaming is enabled at the Universe level.
The fourth network interface (LAN-4) on every MS-1e in the Universe will need to be configured with an
IP address, subnet mask and optional gateway. This configuration requires the MS-1e hardware to be
physically connected on the LAN-4 Network Interface port to a LAN or WAN with a valid connection to the
other Worlds. If MS-1e VoIP paging is enabled Live Interworld streaming (LAN-4) will be disabled at the
Universe level.
Содержание Vocia MS-1E
Страница 1: ...MS 1E OPERATION MANUAL 0D 585 0394 90A...
