A:
9300 Gemini Drive, Beaverton, OR 97008
T:
+1 503.641.7287
W:
www.biamp.com
Installation Option - TCM-X/TCM-XA “Corner” Install
This option installs the TCM-X/TCM-XA on a corner where two “T-bars” meet.
1.
Install the clips on the notched fittings of the TCM plenum box cover as
shown.
2. Fit the clips over two perpendicular T-bars (in the corner) above the
ceiling tile with the plenum box oriented as required.
3. Install the microphone mount through the hole in the ceiling.
4. Secure the microphone mount with the retaining hardware (washer and
nut) from above the ceiling tile.
Installation Option - TCM-X/TCM-XA Corner/Tile Bridge Install
This option installs the TCM-X/TCM-XA on a corner where the tile bridge and
the tile mounting “T-bar” meets.
1.
Fit the tile bridge over the ceiling tile so that the ends of the tile bridge fit
over the ceiling T-bars to secure it in place.
2.
Install the clips on the notched fittings of the TCM-X/TCM-XA plenum
top cover.
3. Fit the clips over the T-bar and the TB-1 above the ceiling tile with the
plenum box oriented as required.
4.
Install the microphone mount through the hole in the ceiling.
5.
Secure the microphone mount with the retaining hardware (washer and
nut) from above the ceiling tile.
Figure 6 Above-Ceiling Tile Corner Installation Option
Figure 6 Above-Ceiling Corner Tile Bridge Installation Option
Figure 5 Above-Ceiling Tile Bridge Installation Option
Figure 7 Above-Ceiling Tile Corner Installation Option
Installation Option - TCM-X/TCM-XA Tile Bridge Install
This option installs the TCM-X/TCM-XA directly into the tile bridge. The plenum
box may be mounted in either of the above configurations.
1. Install the microphone mount through the holes in the ceiling and the
tile bridge.
2. Secure the microphone mount with the retaining hardware (nut) from
above the ceiling tile.
