A:
9300 S.W. Gemini Drive Beaverton, OR 97008 USA
T:
+1 503.641.7287
W:
www.biamp.com
6
HARDWARE INSTALLATION
The ALFA II is designed to be mounted in a rack or as a stand-alone unit on a desk, drawer or other sta-
ble surface.
Always allow at least 40 mm of free space above the unit as air circulation around the unit is needed for
reliable performance. If installed in a closed environment, forced air circulation may be needed.
Mounting the unit in a 19” rack
The ALFA II can easily be installed in a 19” rack.
Due to the standard 1U height, low weight and small mounting depth the ALFA II can be mounted from
the rack front without the use of a rack shelf or rear supporting rails.
1: Mount two clip nuts on each side of the rack as shown below:
2: Slide the ALFA II into the rack and secure with the M6x10 screws.
3: The unit is now ready to be connected with all peripherals as needed.
