Biamp Cambridge Qt 300, Инструкция по установке и эксплуатации

Страница: 22 / 38

22
Operations Section in Modify Mode:
The Operations Section contains three blocks. The block on the left allows zone selection and shows the
emitter configuration for each zone.
The Apply to Zones block in the middle allows the configuration of the following:
• Min and Max levels for Masking outputs.
• Min and Max levels for auxiliary audio inputs A and B
• Auto ramping
• Emitter settings
•
Mute and Unmute Control
The Time of Day Ops block on the right allows for the configuration of the following:
• Ramping start times
• Ramping interval
• Weekend ramping schedule
Setting Emitter Type and Masking Spectrum per Zone
To modify the emitter type and spectrum, click “Emitter Settings” and a new box will appear:
1 Select the Emitter Type and Masking Spectrum with the drop-down menu and click the Submit button. The
settings will be sent to the control module. To return to the main Operations Section click “Back”. Note that
the screen returns to the Review Mode screen.
2 When used with Active Emitters, the standard Qt spectrum duplicates the sound of the Qt emitters and
may be preferred when using Qt and Qt AE emitters in adjacent zones. The AE spectrum has more low
frequencies and a slightly warmer sound.
3 Return to the Modify Mode screen. Repeat for the remaining zones.
NOTE: It is not possible to select an AE spectrum with a standard Qt emitter.