19. To link speaker inputs to amplifier outputs work left
to right.
20. Select L1, it will turn orange. Click on
ALC1604D bridged channel 1. The speaker input side
will automatically index to the next input, click
ALC1604D bridged channel 2 etc.
22. Continue the process for Mids and Highs taking care
to properly assign "Left to Right" starting on amplifier
channel 1 of the ALC404D.
23. Once all speaker inputs are linked to amplifier
outputs as shown here, the band passes, limiting and
Beamforming settings are loaded into the amplifier
channels.
24. Double check your work to ensure it will match the
speaker wiring prior to applying signal to the system.
25. The amplifier outputs are intentionally muted in the
Beamforming presets.
26. Once synchronized to physical amplifiers you may
select the "Tune" tab in the lower left of the screen and
"Mute" function.
27. When you click on the speaker image, mute buttons
will be shown at the bottom of the screen and available
for use.
Copyright 2013-2020 Biamp Systems
http://support.biamp.com/
5
