12. To place the amplifiers in a rack (for ease of
organization), select the "Add" button at the bottom of
the screen again.
13. Select "Rack" next to the Amplifier tab. Click on the
default description above it and label as desired.
14. To load the amplifiers into the rack, click the "Assign"
button on the rack and click on each amplifier.
15. "Add" an "Adv Group" from the groups dropdown
above the speaker images. To assign the "Advanced
Group" to the speakers for system equalization, click the
"Assign" button on it then click each speaker.
16. Once the Advance Group is assigned to the
speakers it will look like this.
The "Adv Group" acts the the system equalizer across all
channel inputs. We never equalize individual amplifier
channels in a LVH-900 system.
17. To link amplifier outputs to loudspeakers we must
select "Link" at the bottom of the screen.
18. Select "Split Mode" above the speaker. The
speakers will show vertical lines thru it denoting the (11)
driver sections.
Copyright 2013-2020 Biamp Systems
http://support.biamp.com/
4
