Bialetti SLW06, Инструкция по эксплуатации

Страница: 39 / 112

EN
39
8. Problems/causes/solutions
Problem found Possible cause Solution
The appliance does not
turn on.
Plug (15) not inserted.
Check proper inser-
tion of the plug or in-
sert it into a diff erent
power socket.
The voltage required
for the appliance does
not correspond to the
available mains volt-
age.
Check the mains volt-
age with the values
required for the appli-
ance.
Possible internal dam-
age. Contact the Customer
service Bialetti.
The bowl (2) is locked,
cannot be removed
from the motor unit.
The bowl was fi lled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (10)
on position “REV” for
3-5 seconds twice or
three times.
The hopper (7) is
jammed.
The hopper was fi lled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (10)
on position “REV” for
3-5 seconds twice or
three times.
Use the presser (11).
The motor is blocked.
The bowl was fi lled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
Press the switch (10)
on position “REV” for
3-5 seconds twice or
three times.
The safety system
started owing to a
motor overheating.
After each use, discon-
nect the plug from the
mains outlet, empty
the hopper and the
bowl and allow the
motor to cool down
for at least 15 minutes.