English
7
29
Press the "OK" button to pause the operation. Once the
operation is complete the machine exits the "Water filters
management" menu. To exit, scroll the menu using the
"Up" or "Down" buttons until option "Exit". Fill the water
tank again up to the MAX level with fresh drinking water.
The water filter icon with 100% appears on the
machine-ready screen to indicate that the filter has been
installed.
7.3.2
Replacing the water filter
Replace the water filter as
soon as its capacity drops
to 0% and the filter icon
blinks quickly.
Replace the water filter at
least every 3 months, even
if the machine has not yet
indicated
the
need
to
replace it.
Pull out the water filter. Follow the steps described under
"Preparing and Installing the Water Filter". The operations
relating to the descaling phase are not requested. You just
need to replace the filter and activate the new one. The
display automatically updates the number of filters used.
Fill the water tank again up to the MAX level with fresh
drinking water.
Replacing the Filter after Using 8 Filters
Pull out the water filter. Follow the steps described under
"Preparing and Installing the Water Filter". All operations
relating to the descaling phase are requested as well. The
display automatically updates the number of filters used.
Fill the water tank again up to the MAX level with fresh
drinking water.
7.3.3
Remove water filter
If the filter is installed in the machine and you want to
remove it, follow the steps below.
Remove the water filter. Descale the machine as described
in section "Descaling". You do not need to remove the
small white filter, since it was removed previously. Once
descaled, the machine requests to press a button.
Once the button is pressed the following screen is displayed:
Select "NONE" and press the "OK" button. Exit the
programming mode.
Put the small white filter back into place. Fill the water
tank again up to the MAX level with fresh drinking water.
