background image

General Information 

 

 

5

Operational Life 

The equipment is designed and tested for a 
useful life of seven (7) years or 
10 000 transfers—whichever  comes  first—
subject to preventative maintenance as 
specified in the “Disinfection, Cleaning and 
Maintenance” section in this manual. Time 
equivalence between the number of transfers 
versus the number of years is made clear in 
the table below. 

Transfers per Day 

Years  

(10,000 transfers) 

4 7 

6 4.5 

8 3.5 

 

WARNING: The manufacturer cannot ensure 
full safety for a floor lift or an accessory of 
which the life span has been exceeded. 

 

The operating life of this equipment 
corresponds directly to the safe operating time 
period before a complete overhaul is required. 
Aging of the unit, frequency of use (transfers 
per day), the weight of the patient and 
maintenance frequency are factors that have 
an impact on the lift’s life span. A transfer is 
defined as the displacement of a patient from 
one point to another. A transfer cycle includes 
a lifting and a descending action. 

The expected life for other consumable 
products, such as batteries, fuses, lamps, 
slings, straps and cords is dependent upon the 
care and usage of the equipment concerned. 
Consumables must be maintained in 
accordance with published 

Instructions for 

Use 

and the “Preventive Maintenance 

Schedule”. 

Equipment Identification 

The unit's identification number 
(specification, model, serial number) appears 
on a silver nameplate attached to the lift’s 
mast. 

 

Verifying the Package Contents 

Upon receipt of the equipment, verify it 
against the packing list to ensure it is 
complete and inspect the equipment for 
possible damage due to shipping. If there is 
any damage, notify the carrier immediately to 
file a claim. Provide complete information 
concerning damage claims or shipping errors 
to your local BHM Medical representative. 
Include all equipment identification numbers 
and group part numbers (if any) as described 
above along with a full description of 
damaged parts. 

Policy on Number of Staff Members 
Required for Patient Transfer 

BHM Medical’s passive and active series of 
lifts are designed for safe usage with one 
caregiver. There are circumstances, such as 
combativeness, obesity, contractures etc. of 
the patient that may dictate the need for a 
two-person transfer. It is the responsibility of 
each facility or medical professional to 
determine if a one or two person transfer is 
more appropriate, based on the task, patient 
load, environment, capability, and skill level 
of the staff members. 

Содержание Ministand



























Отзывы: