T5 Treadmill
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhfitness.com • Phone 949-206-8152 • Fax 949-206-0013
18
CONSOLE OPERATION CONTINUED
INSTANT SPEED/INCLINATION KEYS – You can change the speed or inclination of the
treadmill by pressing one of the Instant Key buttons. Each key represents the assigned value
in either Miles Per Hour (MPH) or percent grade.
NOTE:
Additional information about Incline:
1. When the safety key is removed and put back, whatever the current position of incline, it will
not return automatically to zero. The user must press the Start key to return the incline to zero.
2. When the user turns off power and then turns it back on, whatever the current position of
incline, it will not return automatically to zero. The user must press the Start key to return the
incline to zero.
3. During a program, if you press the Stop to PAUSE, then the incline will return to zero.
FAN – Press this key to blow air from the vent located at the top center.
LOWER CONTROLS:
QUICKSTART – This key is used to begin any treadmill program or QUICKSTART.
STOP – This key is used to stop the treadmill at any time. Press the STOP button and hold for
3 to 5 seconds and the computer controls will end the program and permit the
selection of the next program.
This key is used to adjust the speed of the treadmill.
This key is used to adjust the inclination of the treadmill.
TO STOP
1. Step off running belt onto the side rails.
2. Press STOP. The running belt will stop.
NOTE: To stop immediately, pull out the safety key from the safety key recess and the treadmill
will stop abruptly.
NOTE: Press and hold STOP for 3 to 5 seconds to end the program.
