BH FITNESS LK700R, Руководство пользователя

Страница: 19 / 31

19
LK700R-V4
STEP 6
Slide the Control Tube Cover (O) onto Control Tube (F) (Pictured in Figure 6-1). Then thread
the lower control wires from the Front Frame (A) through the Control Tube (F). Attach the
Control Tube (F) and Front Frame (A) with the Hex Screws (K13), Spring Washers (K14) and
Washers (K21), then tighten firmly. Attach the Handrail Tube (E) to the Control Tube (F)
with Hex Screws (K16), Spring Washers (K14) and Washers (K15). Connect all wires from
the Console (G) with the wires you threaded through the control tube. After connecting the
wires from Console (G) to the wires threaded throught the control tube, push the connected
wires down the neck of the control tube. This prevents the wires from getting pinched when
connecting the Console (G). Then attach the Console (G) to the Control Tube (F) with Phillips
Screw (K17). Then assemble the left & right foot pedals (L, K). Each foot pedal is labeled with
the "L" and "R" for left and right, please make sure you are attaching the correct pedal onto the
correct side.