BH FITNESS LK590, Руководство пользователя, Страница: 15 / 31

15
STEP 1
Insert the left & right Uprights (C &
D) into the support bracket on the
Frame (B). Tie the Control Cable to
the Guide Thread coming out from the
bottom of the Upright (D). Pull the
Control Cable through the opening
with the Guide Thread to the top of
the Upright (D). Be careful not to
damage the wire. Insert the screws (b
and d), spring washer(f) and washer(e)
as shown in the drawing and DO NOT
TIGHTEN UNTIL STEP 2.
STEP 2
Place the Hand Rail Fixture (E) on top
of the left and right Uprights. Using
the Guide Thread, pull the Control
Cable through the opening of the
bottom and out the top center of the
Hand Rail Fixture. Tighten the nylock
nuts (a). Then TIGHTEN SCREWS
(b and d) from STEP 1. Now secure
the left and right Uprights. Assemble
the left and right motor side covers (F
and G) and tighten with screw (b).
Guide Thread
Guide Thread
Control Cable
Control Cable