BH FITNESS IRIDIUM AVANT, Руководство пользователя

Страница: 11 / 21

10
ght hand side, as shown in
the bar using the covers
26 and 127) marked on the inside with
ow
edure using the
overs (118 and 119) marked on the
ct the two terminals
to pinch any of the cables. Fit the bolts
(5) along with the flat washers (12) and
position them at the spindle end with the
bars on the ri
Fig. 7. Now use screws (27) and (60) to
attach them.
Carry out the same procedure at the
other end of
(1
the letter “L”.
9. ATTACHING THE FOCUS BAR
SIDE COVERS TO THE FOOT
BARS
Take the covers (118 and 119), marked
on the inside with the letter “R”, and
position them at the end of the foot bars
with the inside of the focus bars on the
right hand side, as shown in Fig. 7. N
use screws (27) to attach them. Use
screws (61) to screw them together.
Carry out the same proc
c
inside with the letter “L”.
10. ATTACHING THE MONITOR
Bring the monitor (1) to the main post
(11) Fig. 8, conne
coming out of the main post (11) and the
monitor (1). Fig. 8.
Insert the monitor (1) into the main post
(11), as shown in Fig. 8, making sure not
spring washers (14). Securely tighten all
of the bolts on the main post.
LEVELING
Once the unit has been placed into its
final position, make sure that it sits flat on
the floor and that it is level. This can be
achieved by screwing the adjustable feet
(Y) up or down, as shown in Fig. 9.
MOVEMENT & STORAGE
The unit is equipped with wheels (W), as
shown in Fig. 10, which make it easier to
move. The two wheels at the front of the
unit make it easier to place the unit into
any chosen position by lifting the rear
slightly.
Store your unit in a dry place, preferably
not subject to changes in temperature.
POWER CONNECTION
Insert the plug for the transformer into
the jack on the main body (bottom, rear
of the machine) and then plug the
transformer (138) into a 110-120 V wall
outlet. Fig. 11.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE