BH FITNESS G-6446N, Руководство пользователя

Страница: 10 / 31

10
FAULT FINDING CHART
PROBLEM CHECKS SOLUTIONS
1.The monitor does not switch
on.
1) Make sure that the
machine is plugged in, the
ON/OFF switch in position 1
and that the safety key is
inserted.
1) Plug the machine into the
mains supply. Set the
switch to position 1 and
insert the safety key.
2.The monitor switches on but
the motor fails to start.
2) Check that the current
limiter is pressed in.
2) Switch the machine off and
press the circuit breaker in.
Lubricate the treadmill
band.
3.Walking motion is jerky on
the treadmill.
3.a) Check that the belt is
lubricated.
3.b) Check the tension on the
sliding belt.
3.c) Check the tension on the
drive belt.
3.a) Lubricate the sliding belt.
3.b) Adjust the belt tension.
3.c) Adjust the drive belt
tension.
4.The machine stops (the
breaker trips).
4) Check that the band is
lubricated.
4) Reset the overload button
with the On /Off switch at
„0“ and lubricate the
treadmill band.
5.Electrical shocks through
the handrail.
5) Check that the machine is
plugged into an earthed
mains socket.
5) Plug the machine into an
earthed mains socket.
6.The treadmill belt skews off
centre.
6.a) Check that the machine
is level on the floor.
6.b) Check that the machine
does not wobble.
ERROR CODES
Monitor screen displays E1 - Possible motor overload.
- Lubricate the belt.
Monitor screen displays E2 - Switch the machine off and on again.
Monitor screen displays E4 - Body fat function fault.
- Restart the machine and place your hands
correctly for a pulse rate reading.
Do not hesitate to get in touch with us if zou have any queries, by calling:
902 170 258