![background image](http://html1.mh-extra.com/html/bgu/sm-300/sm-300_original-instruction-manual_2747390016.webp)
16
8. REPAIRS AND
MAINTENANCE
Fig. 8
10
Make sure that the machine is fully disconnected and all mo-
ving parts are secured before performing any maintenance/re-
pair work on the machine. In the event of any malfunctioning,
switch the machine off before trouble-shooting.
8.1 Ordinary periodic maintenance
Make maintenance a regular part of daily operation. The daily mainte-
nance routine needs to include:
• Cleaning of the machine and clearing of all parts from residual wood
debris, chips, dust, bark pieces and eventual other waste.
• Greasing of the piston rod pads inside the splitter slider.
• Hydraulic oil check and (in case of leakage) hydraulic hose and fit-
tings check-up to detect eventual oil leaks. To check the oil level re-
move the rear cover first.
• Lubrication of all moving parts.
8.2 About hydraulic oil
Periodically check the oil level inside the hydraulic oil tank. When doing so,
accurately avoid contaminating the tank with dirt, wood chips, dust etc...
Make sure that the splitter never runs without oil or with a low oil le-
vel. When this happens, air is likely to reach inside the hydraulic loop.
Failure to maintain due oil level may cause poor running and irregular
splitter operation (very rough, back/forth or up/down motions) as well
as major pump damages.
Please schedule your first oil change after approximately 50 operation
hours and later ones after each 3000-5000 operation hours.
The oil drain plug is located on the bottom tank side while the fillercap
(10) is on the upper right hand side of the tank (see fig. 8).
Recommended oil types:
DEA HD B 46, Shell Tellus 10-46, Esso Nuto H 46
When changing the oil, never let used oil drop down on the ground,
rather collect whole of it in a sealed container for due disposal. Oil
disposal containers should be of at least 9 l capacity. If you are using
smaller containers, make sure to drain the tank in more than one
round to avoid spilling old oil out on the ground.
Used oil is very polluting and should be disposed in accordance
with local rules!
Содержание SM 300
Страница 21: ...21 230 V version Components 1 Box K700 2 Overload safety switch 13 5A 3 KB 04 Uc 230V 4 Motor...
Страница 24: ...24 15 SPARE PARTS FOR SM 300...
Страница 25: ...25...
Страница 30: ...30...