page 19 /
49
Insructions manual
BBS 500 B
2014-05-05
8
Danger from neglecting of ergonomic principles
8.1
Unhealthy
position or
excessive
exertion
(repeated
overload)
Inappropriate body position and
excessive exertion
For the saw control
The ergonomic design of the machine,
lifting of the cutting head is controlled by an
electric drive
It is not
Excessive
exertion and
/ or repeated
overloading
Manual control of the machine
At the track of machine
When manual handling of log use the track
for rolling up the log as well as the lever,
warnings in the manual
It is not
8.2
Inadequate
demands on the
anatomy of the
arm - hand
Manual control of the machine
In places of the operator
when working
Ergonomic positioning of the control panel
and other controls, observe the conditions
of work safety, warnings in the manual
It is not
8.4
Inadequate local
lighting
Weakened balance and accuracy in
handling activities / setting the cut
material and cutting tools
In places of the insertion and
removal of cut material, in
places of tool assembly for
cutting
Observe the safety conditions of work,
cautions in the manual - recommended
lighting of machine
It is not
When inserting or removing material,
while adjusting, changing of cutting tool,
maintenance
Observe the safety conditions of work,
cautions in the manual - recommended
lighting of machine
It is not
8.6
Human errors,
human behaviour
Logically implied improper use
For the machine
Caution in the manual - forbidden use of the
machine
It is not
Careless operation of controls
Warning in the manual - requirements for
operational staff
It is not
Improper handling of the material being
cut and the cutting tool, their incorrect
adjustment
Warning in the manual - safe handling and
clamping of material, machine adjustment
Není
When inserting or removing material,
while adjusting, changing of cutting tool,
maintenance
When replacing the saw blade, the machine
can not start (cover is open, service mode),
warning in the manual - a safe handling and
clamping of material, machine adjustment
It is not
8.7
Danger
caused by an
inappropriate
design,placement
or wrong
identification
of controls
Improper placement and choice of
manual controls (such as control device
to start, stop and for coolant) during the
operation, while adjusting, changing tools
for cutting and maintenance
For the machine
Ergonomic positioning of the control panel
and other controls.
It is not
11
Hazards.caused.
by the inability
to stop the
machine in most
appropriate
conditions
Malfunction or failure of the control
system during the working cycle of the
machine
At the machine and / or in its
vicinity
Installation of the emergency button
TOTAL-STOP on the control panel,
warnings in the manual
14
Failure
of control
circuit
When adjusting, cleaning
For the machine
Without deliberate mechanical action on
the starter cord, the engine can not start,
warnings in the manual - the correct and
safe maintenance and adjustment
It is not
15
Danger caused
by incorrect
connection
Tool for cutting, or its part ejected during
machine operation
At the machine and / or in its
vicinity
Covering of the most part of the saw band
on the arm, warnings in the manual -
replacement, tensioning and adjustment of
the saw band
It is not
17
Danger
caused by
falling down or
ejection
of objects
or.leakage
of liquid
Ejection or falling parts of the cut
material and debris, during the machine
operation, cutting, adjusting, changing
cutting tools, maintenance
At the space and / or in the
vicinity of the cutting area and
cut material
Signs to use protective equipment, warning
in the manual - the optimum cutting
conditions, setting the sliding guides,
maintenance instructions
Cutting tool or tooth breakage and
ejection
At the machine and / or in its
vicinity
Covering most of the saw band, warnings
in the manual - the optimum cutting
conditions, setting the sliding guide bar, the
control panel in a safe position
It is not
Ejection of broken machine parts
Caution in the manual - in the danger zone
only machine operator
It is not
18
Hazards.caused.
by loss of
stability
Dropping or tipping over an unsecured
machine or its parts
For the machine
The machine has a robust design to
prevent overturning during normal
operation. When handling - warnings on
machinery packaging, warnings in the
manual - instructions for safe handling
and installation of equipment, anchoring of
equipment