BGS technic BGS 70009, Инструкция по эксплуатации

Страница: 3 / 8

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 70009
Engine Timing Tool Set
for Volvo 5 Cylinder 2.0 / 2.4 / 2.5 Diesel
TOOLS
1 Counter-Holding Tool for Crankshaft Pulley,
to be used as OEM 999 5433
2 Crankshaft Locking Pin,
to be used as OEM 999 7005
3 Camshaft Locking Pin,
to be used as OEM 999 7007
INTENDED USE
This tool set is used for checking and adjusting the engine timing and it is suitable for
5 Cylinder Volvo Engines 2.0 / 2.4 / 2.5 Diesel with e.g. following engine codes:
Engine Engine Code Engine Code Engine Code Engine Code Engine Code
2.0 Diesel D 5204 T D 5204 T2 D 5204 T3 D 5204 T4 D 5204 T5
2.0 Diesel D 5204 T6 D 5204 T7
2.5 Diesel D 5244 T D 5244 T2 D 5244 T4 D 5244 T5 D 5244 T7
2.5 Diesel D 5244 T8 D 5244 T9 D 5244 T10 D 5244 T11 D 5244 T13
2.5 Diesel D 5244 T14 D 5244 T15 D 5244 T16 D 5244 T17 D 5244 T18
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
1
2 3