BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8737
Wheel Bearing Tool Kit for Mercedes
INTENDED USE
The Wheel Bearing Kit was designed to renew wheel bearing on the following Mercedes models:
190 (W201), A-Class (W168, W169), B-Class (W245), W124, C-Class (W202, W203), E-Class
(W210), M-Class (W163, W164), S-Class (W140), V-Class (W639). The kit includes all necessary
special tools for disassembly / assembly.
SAFETY ADVICE
•
Read carefully the instructions before working with this tool set.
•
Do not use this tool set for other purpose for which it is designed.
•
Lifting of vehicles only allowed on the special lifting points.
•
Before starting work under a car always ensure that it is adequately supported by axle stands or
ramps. Chock wheels and ensure that the hand brake is firmly applied.
•
Always use approved eye protection, especially when working under vehicles.
•
Ensure a secure and well-gripped stance during fitting.
•
Ensure that tools are correctly mounted.
•
Regularly check the condition of the tool and replace the damaged parts.
•
Do not over tighten or use undue force as this can cause damage to both tool and component.
•
The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to the
spindle bearing or other components bursting and fragments of components flying around may
lead to injuries.
•
Always use workshop manual for detailed instructions.
•
Always lubricate the screw threads before using the tool.
•
Check & replace any damaged components as required.
•
Keep children and unauthorized persons out of the working area.
•
Keep this tool out of children reach.
