BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
IMPOTANT NOTES
Note:
Do not remove any safety signs, stickers, or labels from the product
. Some of the following
stickers are on to the product, please keep them in a legible condition.
Do not perform any welding work
on the product.
Important instructions,
which must be observed.
The product is not suitable for
flammable, explosive or corrosive
liquids, such as gasoline, diesel
fuel or chemicals
.
The product is suitable for
engine, differential, transmission
oil and antifreeze.
Do not expose the product to hot
sources. Keep the product away
from places such as open flames
or welding works
.
This product has 2 swivel castors.
55
liter tank volume
Always wear safety gloves when
using this product.
Read the instruction manual
before first use
.
Always wear safety goggle when
using this product.
COMPONENT ASSEMBLY
No.
Description
Qty
1
Filter board
1
2
Handle bar
1
3
Handle
1
4
Container
1
5
Nut
1
6
Washer
1
7
Bolt
1
8
Nut
4
9
Washer
6
10 Swivel Caster
2
11 Conection Piece
1
12 O-Ring
1
13 Bolt
2
14 Bearing
2
15 Nylon Wheel
2
16 Drain valve
1
USE
Make sure the container has enough volume to hold the liquid to be drained. Raise the vehicle with a lifting
platform, place the receptacle at the drain point under the vehicle. Carefully remove the drain plug on the
component and allow the liquid to flow into the oil drip pan. Make sure that no liquid gets into the
environment. Bind any spilled oil immediately with absorbent granules or similar material. Always dispose
of used oil at the appropriate waste oil collection point.
55L
