BGS technic 3480, Инструкция по эксплуатации

Страница: 7 / 20

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
SAFETY INFORMATIONS
•
Do not overload the product. Note the maximum load capacity, these can be seen in the
chapter "Technical data".
•
Before use, inspect the rope for damage and ensure that the rope is properly wound on the
reel.
•
Before pulling the load, make sure that the hook is properly engaged.
•
Always pull the load in line with the rope and winch. Never pull the cable around a corner.
•
Use only the lever built into the winch. Do not lengthen the lever, use e.g. no tube to extend the
lever.
•
Check along the entire length to see if the rope is kinked or frayed. Have a damaged rope
replaced before the product is put into operation again.
SPECIAL SAFETY INFORMATIONS
This product is used only for pulling loads
on a level surface.
Never use this product to lift loads or to pull loads on sloping surfaces!
TECHNICAL DATA
BGS 3480 3482
Max. Capacity max. 500 kg (500 daN) max. 1000 kg (1000 daN)
Steel rope diameter 4.8 mm 6.0 mm
Steel rope length 1200 mm 1600 mm
Hook opening 16 mm 18 mm
Hook cross-section 23 x 16 mm 27 x 16 mm
Transmission T=2.0 /3x/ 15 Zähne pro Hub T=2.0 /3x/ 19 Zähne pro Hub
Lever length 300 mm 500 mm
Weight 2.2 kg 5.3 kg
Fig.1
Fig.2
Fig.3