BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
WARNING
Before beginning assembly of this product, make sure all parts are present.
Compare parts with package contents list, illustrated in figure 1.
If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Contact customer service for replacement parts.
1
Head Cushion
2
Locking Pin
(Not Shown)
3
Fasteners
4
Casters
5
Head Frame
6
Middle Frame
7
Rear Frame
8
Casters
OPERATING INSTRUCTIONS
To transform creeper into seat position
To transform seat into creeper position
1. Locate, then unlock the spring loaded Lock
Pin by pulling out until disengaged, at the
same time flip the Head Frame and Middle
Frame upward and back towards the Rear
Frame section until the Lock Pin can engage
the Creeper Seat Locking Sleeve (Fig. 3).
Ensure Lock Pin is fully engaged.
2. Flip the Head Frame forward until horizontal.
3. Unlock the spring loaded Lock Pin by pulling
out until disengaged, then reverse steps 1, 2
to convert Creeper Seat into Creeper.
CARE AND MAINTENANCE
Check the device every now and then for damage and the castors are securely
Wipe clean as needed.
Use only mild, non-caustic cleaner to clean the upholstery and frame.
Never add lubricant to casters !
Figure 1
Figure 2
Figure 3
Lock Pin
Lock Pin
