User Manual of Solder Cream Mixer
IV. Installation and debugging
1. Remove the packaging, read this manual carefully. Both hands hold the base to lift the host in right
direction, put host well onto solid and smooth ground.
2. Open the lock, open machine cover, run revolution-running device clockwise by hand, fixture of
solder cream pot should make corresponding rotation movement at the same time.
3. Confirm the power and turn power switch to OFF position and connect to the power supply.
4. Connect ground electrode of the host.
V. Operating steps
Step1
: Loose the lock button and open the machine cover.
Step2
: Take solder cream and put lining (remarks: don't need to add lining if solder cream diameter is
more than φ64.), take attached balance weights 500g.
4
