BLUEDENT SMART cordless
Dental curing light
17
X. FAQ
Problem
Solution
There is no indication “ON” on
the charging station
Check the adapter, cable and whether it is
plugged into the charging station. Check
for metal objects on the contact system of
the charging station.
Rapid battery drain
The battery needs to be replaced.
There is no charge indication of
the handpiece
If there is
an “ON” indication on the
charging station - clean all contact surfaces
of the station and the handle. If "CHARGE"
does not appear - replace the battery or
send for service.
Weak polymerization effect
It is necessary to clean the tip of the
fiberoptic lightguide with a non-metallic
object and to clean the adhered composite
or other with alcohol. If the result is poor -
send the device to the service.
There is no sound signal
Hold down the left MODE button for 5-6
seconds until a sound is heard and ON
appears on the display.
The display shows Oh, the fan is
running and the blue light
cannot be started
The appliance is overheated. Wait for it to
cool for 3-5 minutes.
The patient experiences
discomfort during the
polymerization process,
especially during a long
polymerization time of 20-
30sec
It is necessary to polymerize with short
cycles - 10sec or less, with short breaks of
1-3sec. The sensitivity is higher if the light
is close to the dental pulp and decreases
with each layer. PULSE mode can be used.
