BFT EOS 120 VENERED, Инструкция по установке и эксплуатации

Страница: 7 / 15

LEGENDA
Fig. A
OK
Press the OK key
BFT
venere d
0000
0000
00
[
00
]
Parameter increment/reduction
or ON/OFF commutation
Menu scrolling
(+ = preceding - = following)
Press OK key (Enter/confirm)
OK! message (confirms modification made)
PRG
OK
+
/
-
OK
ACCESS TO MENUS
-
+
/ON
/OFF
Control unit software version
No. total manoeuvres
(x 10)
No. manoeuvres since latest
maintenance(x 10)
No. radio control devices
memorised
KO! message (value or function error)
PRG
“Wait” message (enter value or function)
Simultaneously press the + and - keys.
Simultaneous pressure of the + and – keys
allows you to exit the active menu and return
to the preceding menu; if this takes place at
the main menu level, programming is exited
and the display switched off.
The modifications made are only confirmed if
the OK key is subsequently pressed.
Preset value
OK
8 8 8 8
master
3 step
ibl open
pre-alarm
photoc. open
test phot
sca 2 ch
fixed code
radio prog
start-open
ped-close
zone
End
cl speed
op speed
dist.sloud
LOGIC.
FOLLOWING MENUS
FIG. B
op. torque
cls. torque
part. open
End
18 -
EOS 120 VENERE D
D811526 00100_02