P a g e
|
6
Connecting to a Gate Controller
S
ta
rt
C
o
m
m
o
n
GSM Cellular
controller
Keypad
Gate motor
controller
Intercom
N/O
COM
COM
N/O
Other Wiring Tips
Connecting DC magnetic
lock
GSM
output
Optional
keypad
output
Lock
Separate
PSU
Connecting AC/DC strike
lock
GSM
output
Optional
keypad
output
Lock
Separate
PSU
Powering Up
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate and the unit will emit a
series of bleeps and then stop after approx. 8 seconds.
GSM
modem
Power LED
GSM LED
CPU LED
open
close
Searching
Network found
Standby
Busy
TIPS:
My GSM LED is still searching / Unit Bleeping
…
-Check SIM card is registered and can make call in cell
phone.
-Check the SIM card is seated correctly. Power off,
clean the contacts on the SIM and the GSM unit, and
reinsert the SIM. (Lightly sand).
-Check power cable distance and thickness.
-Change network.
-Fit a high gain antenna.
