i)
Remove the burner by lifting clear from the combustion chamber as
shown below in Fig. 11, take care to also lift out the receiver unit and
wiring loom, (the receiver unit is held in position with velcro, centrally on
the base unit of the firebox).
Fig. 11
j)
Store the burner unit in a safe position.
k)
Ensure that the hearth is protected from damage and carefully lift the
fire box into the fire opening, then slide it back into position. Check that
the fire box flange fits flush to the sealing face of the fire surround or
wall with no gaps present.
14
