5
Before Use
•
Always ensure the correct operating conditions and cooling function.
• Always ensure that sufficient and adequate cooling is delivered and ensure adequate suction. In case of
coolant supply failure, the turbine handpiece must be stopped immediately.
•
Check the Maxso handpiece for damage and loose parts prior to use (e.g. press button on contra-angle).
•
Avoid contact between the instrument head and soft tissue ( risk of burning due to the press-button
heating up).
• Use only non-contaminated, filtered, oil-free and dry compressed cooling air to operate the Maxso
handpiece.
•
The operation of the contra-angle is permitted only on dental units which correspond to the standards
IEC 60601-1 (EN 60601-1) and IEC 60601-1-2 (EN 60601-1-2).
Hygienic maintenance prior to initial use
The Maxso handpiece is in a clean condition and sealed in PE-film when delivered. Lubricate the contra-angle
handpiece prior to initial use. Sterilize Maxso handpiece and nozzle cleaner as well as the limit stop.
• Oil service Page 18
• Sterilization Page 21