manualshive.com logo in svg

BEYES Comfortek, Инструкция по эксплуатации, Страница: 22 / 24

Поделиться
Скачать
BEYES Comfortek Скачать руководство пользователя страница 22

22

14.3 Exclusions

This limited warranty does not cover and BEYES shall not be liable for the following;

(1) defects, damage or other conditions caused, in whole or in part, by misuse, 

abuse, negligence, alteration, accident, freight damage, negligent storage, 

tampering or failure to seek and obtain repair or replacement in a timely manner; 

(2) products which are not installed, used, and properly cleaned and maintained as 

required or recommended in the BEYES 'Installation' and/or 'Installation/Operation 

Manual' for the applicable product, including the specified structural and operational 

environment conditions and electrical power requirements;

(3) products considered to be of a consumable or sterile nature;

(4) accessories or parts not manufactured by BEYES;

(5) charges by anyone for adjustments, repairs, replacement parts, installation 

or other work performed upon or in connection with such products which are not 

expressly authorized in writing in advance by BEYES;

(6) costs and expenses of routine maintenance and cleaning;

(7) representations and warranties made by any person or entity other than BEYES;

(8) matching of color, grain or texture except to commercially acceptable standards;

(9) changes in color caused by natural or artificial light;

(10) custom manufactured products;

(11) alterations or modifications to the product by any person or entity other than 

BEYES; 

(12) Products that would otherwise by covered under Sections 1 and 2 of this 

limited warranty, but are acquired: (i) from a person or entity that is not BEYES or 

one of its authorized dealers; or (ii) from a BEYES dealer that is not authorized to 

sell the product at issue in the geographic territory where the purchaser is located, 

or is not authorized to sell the product at issue within the medical, animal health or 

dental market, as the case may be, in which purchaser intends to use the product.

14.4 Exclusive Remedy; Consequential Damages Disclaimer

Beyes’ obligation under this limited warranty is the repair or replacement of 

defective parts. Beyes shall not be liable for and hereby disclaims any direct, 

special, indirect, incidental, exemplary or consequential damages or delays, 

including, but not limited to, damages for loss of profits or income, loss of use, 

downtime, cover and employee or independent contractor wages, payments and 

benefits.

Содержание Comfortek

























Отзывы:

Нет отзывов