7
2. Product function and operation
2.1 Scaling funtion
2.1.1 Operation
•
Open the packaging box, make sure that all the parts and accessories are completed according
to the packing list. Take the main unit out of the box and put it on a stable place.
•
Turn the water control knob to the maximum based on symbols as shown in 3.5.2[note 1]
•
Insert the plug of the foot switch to its socket (See picture 2).
• Connect one end of the water pipe to the water entrance , and the other end to the purified
water source (See picture 3)
•
Screw the scaling tip tightly to the handpiece by torque wrench, then connect the handpiece
and the connector of cable correctly.
•
Insert the plug of the power source to its socket, then get through to the power (See picture 2)
• Switch on the main unit , then the scaling indicator and the leading five lights of power regulator
shine.
•
Step on the foot switch, the tip begins to vibrate, and the LED lamp on the top of the handpiece
shines. Release the foot switch, the LED lamp keep shining for 10 seconds.
•
Select a suitable scaling tip as you need, screw it on the handpiece tightly by the torque wrench
(See picture 5)
•
The normal frequency is extremely high. Under the normal working state of scaling tips, a light
touch and a certain to-and-fro motion will elimianate the tartar without heating. Overexertion and
long-time lingering are forbidden.
•
Vibrating intensity: Adjust the vibration intensity as you need, generally turn the knob to the
middle grade. According to patient’s different sensitivity and the rigidity of the gingival tartar,
adjust the vibration intensity during the clinical treatment.
picture 5