MPR 211 – Condenser Microphone
13
english
MPR 211 – Condenser Microphone
12
4.
Operating Mode
ON/OFF
The microphone is turned on or off via a button. The LED will illuminate
red when the microphone is turned on.
PTM (Push-To-Mute)
The button operates as a cough button. The microphone is always
turned on. The LED will illuminate red. When you hold down the
button, the microphone is off and the LED will extinguish.
PTT (Push-To-Talk)
The microphone is on, as long as you hold down the button. The LED
will illuminate red. When you release the button, the microphone is
off. The LED will extinguish.
Output Level
The output level can be set to:
High, Mid, Low.
5.
Connection
The MPR 211 provides a bare ended cable. The functions depend on
the selected operating mode Autonomous, Remote or External Logic.
For powering a phantom power between 24 or 48 V is required,
irrespective of the selected operating mode.
For more information, please refer to the wiring diagram.
Thank you for selecting the MPR 211 condenser microphone from
beyerdynamic. Please take some time to read carefully through this
product information before using the product.
1.
Safety Information
• Protect the microphone from moisture and sudden impacts to
prevent damage. You could either injure yourself or others.
• Do not blow into the microphone, you could damage the transformer.
It is preferable to carry out a speech trial.
• When using wired microphones always ensure that the microphone
cable is laid so that it does not present a trip hazard.
2.
Application
The MPR 211 is a modern desktop microphone, which is ideal for
discussions, tele/video conferencing and announcements.
The Revoluto technology with 17 integrated microphone capsules
provides a so-called corridor characteristic, which ensures a wide range
of good voice quality. Within this range the speaker can move freely,
i.e. he/she can stand up or sit down, move his/her head and move
towards or away from the microphone.
On the left hand side the MPR 211 provides an LED, which will
illuminate when the microphone is switched on.
3.
Basic Function
Autonomous
With this function you can operate the microphone via the built-in or
external button.
Remote
With this function you can only operate the microphone via an
external button. The button on the front of the housing is deactivated.
External Logic
The function is used when operating the microphone with external,
logic controls. The microphone is always active. With this function the
internal logic with micro controller control is deactivated. A typical
application is for example the “Voice Activation” mode in conjunction
with a digital audio matrix.
Switch to select the
basic function
Switch to select the
operating mode
Switch to select the
output level
At the bottom you can select between three
basic functions.
An arrow points to the selected basic
function.
At the bottom you can select between three
operating modes. The different operating
modes are controlled and monitored by a
micro controller. An arrow points to the
selected operating mode. This function is only
available with the basic functions Autonomous
and Remote.
