Beyerdynamic MCS-D 200, Руководство по эксплуатации

Страница: 52 / 88

MCS-D 200 – Microphone Units
52
6.4 Operation
6.4.1 How to operate the Delegate Microphone Units
Press the microphone button once to turn on the microphone or to enter a request-to-speak. Press the microphone button once again to
turn off the microphone or to cancel a request-to-speak.
• When the microphone is activated, the LED of the microphone button and the LED strip or LED ring of the gooseneck microphone will
illuminate .
• When a request-to-speak is entered, the LED of the microphone button and the LED strip LED ring of the gooseneck microphone will
flash . The request-to-speak is registered and the microphone is activated via the iCNS software.
• If the selected limit of open microphones is exceeded, the LED strip or LED ring of the gooseneck microphone and the LED of the micro-
phone button will flash briefly and the delegate has to either turn on the microphone or enter a request-to-speak later.
Depending on the selected operating mode, the LED strip or LED ring of the gooseneck microphone and the LED of the microphone button
display the indications described below:
FREE MODE
The microphone is turned on by pressing the microphone button, if the limit is not yet achieved. If the limit is exceeded, the LED strip or
LED ring of the gooseneck microphone and the LED of the microphone button will flash briefly. The delegate has to try later to turn on the
microphone.
REQUEST MODE
The request-to-speak is entered by pressing the microphone button. The request-to-speak is registered and the microphone is activated via
the iCNS software. The request-to-speak can be cancelled by pressing the microphone button once again. If the limit is exceeded, the LED
strip or LED ring of the gooseneck microphone and LED of the microphone button will flash briefly. The delegate has to try again to enter
the request-to-speak later.
FIFO MODE (FIRST IN - FIRST OUT)
The delegates speak one after another. A delegate can turn on his microphone by pressing the microphone button at any time. If the selected
limit is exceeded, the microphone of the speaker who turned on his microphone first, is deactivated automatically (first in - first out).
AUTO MODE
The delegates activate their microphone or enter a request-to-speak one after another. A delegate can activate his microphone by pressing
the microphone button if the selected limit is not yet achieved. If the limit is exceeded, the request-to-speak is registered by the MCS-D 200
control unit and the microphone is activated automatically as soon as another speaker turns off his microphone. The request-to-speak can
also be cancelled by pressing the microphone button once again. If the selected limit for requests-to-speak is exceeded, the LED of the
microphone button and the LED strip or LED ring of the gooseneck microphone will flash briefly. The delegate has to try again to enter his
request-to-speak later.
FREE - limit is not yet achieved: FREE - limit is exceeded:
LED strips and LED of the microphone button or LED ring of the
gooseneck microphone will illuminate
-> Microphone is turned on LED strips and LED of the microphone button or LED ring of the
gooseneck microphone will flash briefly
-> Try again later!
REQUEST - limit is not yet achieved: REQUEST - limit is exceeded:
LED strips and LED of the microphone button or LED ring of the
gooseneck microphone will flash
-> Microphone will be activated by the chairman LED strips and LED of the microphone button or LED ring of the
gooseneck microphone will flash briefly; no registration
-> Try again later!
FIFO - limit is not yet achieved: FIFO - limit is exceeded:
LED strips and LED of the microphone button or LED ring of the
gooseneck microphone will illuminate
-> Microphone is turned on LED strips and LED of the microphone button or LED ring of the
gooseneck microphone of the new speaker will illuminate
-> Microphone of the new speaker is turned on
-> Microphone of the speaker who has been speaking the longest
is turned off, as soon as the new speaker turns on his microphone
AUTO - limit for turned on
microphones is not yet achieved: AUTO - limit for turned on
microphones is exceeded: AUTO - limit for requests-to-speak is
exceeded:
LED strips and LED of the microphone
button or LED ring of the gooseneck
microphone will illuminate
-> Microphone is turned on LED strips and LED of the microphone
button or LED ring of the gooseneck
microphone will flash
-> Microphone is turned on automatically
as soon as another speaker turns off his
microphone
LED strips and LED of the microphone
button or LED ring of the gooseneck
microphone will flash briefly
-> Try again later!