Bexen Reanibex 700, Техническое руководство

Страница: 160 / 169

TECHNICAL MANUAL DGG 700 B
150
magnitude of the transmitter in
Watts (W) according to the
manufacturer of the transmitter,
and
d
is the recommended
separation distance in meters
(m)
b
The field intensity of fixed RF
transmitters, as determined by
measurement of the
electromagnetic disturbance in
the area, must be less than the
compliance level in each
frequency range
d
Interference can occur within the
vicinity of devices marked with
the following symbol:
NOTE 1: At 80 MHz, the highest frequency range is applied.
NOTE 2: These utilization guidelines cannot be applied to every situation. Electromagnetic
propagation is affected by absorption and reflection in structures, objects and people.
a
The ISM bands (industrial, scientific and medical) between 150 kHz and 80 MHz are from 6.75 MHz to
6.795 MHz; from 13.553 MHz to 13.567 MHz; from 26.975 MHz to 27.283 MHz; and from 40.66
MHz to 40.70 MHz.
b
The degree of compliance in the ISM frequency bands between 150 KHz and 80 MHz and in the
range of frequencies from 80 MHz to 2.5 GHz, is designed to reduce the probability that
mobile/portable communication equipment can cause interference if it is inadvertently brought
into patient areas. For this reason, an additional factor of 10/3 is used in the calculation of the
separation distances recommended in these frequency ranges.
c
The field intensity of fixed transmitters, such as base stations for radio (cellular and wireless),
telephones, land mobile radios and amateur radios, AM and FM radio broadcasts, TV broadcasts,
cannot be theoretically predicted with accuracy. To evaluate the electromagnetic environment
due to RF fixed transmitters, an on-site measurement must be considered. If the field intensity
measured in the location using REANIBEX SERIE 700 exceeds the applicable RF level of
compliance, the REANIBEX SERIE 700 must be examined to verify normal operation. If
abnormal operation is observed, additional measures will need to be taken such as reorientation
or repositioning of the REANIBEX SERIE 700.
d
In regards to the range of frequencies from 150 kHz to 80 MHz, the field intensities must be less
than (
V
1
) V/m
Recommended separation distances between RF mobile and portable communication devices
and the REANIBEX Serie 700