Chapter 3. Overview
IP Video Door Station DS06M(P) Installation User Manual
7
Pic. 3.2
8
– RJ45 socket
: is used for connecting the door station to the NC103 / NC103P / NC311P
controller via a patch cable.
9
–
reset
button
: press this button 3 times with intervals not less than 1 second during 10
seconds to set door station settings by default.
10
– memory card slot
: is situated inside the door station housing, on the upper interface
board, from one side.
3.2. Controller
A door station controller is used for powering the door station, network connection,
processing the signal of door opening and signals of other devices that can be connected to the
door station.
A 1-channel or a 3-channel controller can be included in the DS06M(P) package contents.
There is an
RJ45 socket (
“ETHERNET”)
on the front side of the door station controller,
which is used for connecting the controller to a router (
Pic. 3.3, 3.4
).
Pic. 3.3. Controller NC103 / NC103P