PAGE 6
Add: Floor3,Building A,No.257,Junye Road,Huangpu District,Guangzhou,China
E-mail:[email protected] Http://www.bevsinfo.com
3 Operation Introduction
3.1 Component Introduction
3.2 Operation
1
．
Place the instrument on the horizontal table, take out the brush stand
2
．
Settle the glass plate in the middle of light stainless steel trough plate
3
．
Install and clamp the test panel well, put the brush into the stand
4
．
Connect circuit and power on
5
．
Refer to 3.3 Touch Screen Use
6
．
Open the injection pump if need
（
See the relevant test specification
）
7
．
Press the start button on the screen to start the test
3.3 Touch Screen Use
3.3.1 Connect up mains supply to machine
（
220V 50Hz
）
3.3.2 Power On
3.3.3 Enter the welcome screen and select the language
Brush Stand
Touch Screen
Template Fixing Screw
Container
