PAGE 4
Add: Floor3,Building A,No.257,Junye Road,Huangpu District,Guangzhou,China
E-mail:[email protected] Http://www.bevsinfo.com
2 Product Introduction
2.1 Introduction
BEVS 2805 machine, also called a double headed washability tester, is designed to provide an
accelerated method of determining abrasive wear resistance of surface coatings/ materials, and also
to test the performance and abrasive effect of cleaning compounds.
The abrasion tester provides a means of carrying out such a test under accurately controlled
conditions, resulting in repeatability of results and close comparability of performance between the
two test heads which operate side by side.
2.2 Safety Instructions
1.
Read this instruction manual carefully before switching on the instrument.
2. Keep this instruction manual for future reference.
3. Observe all safety and warning markings on the instrument.
4. Avoid splashing water/fluids over machine when dosing brushes. Keep fluids to a minimum,
taking care not to flood drip tray. Check that drain pipe is always clear.
5. This instrument must only be used in areas electrically classified as NON HAZARDOUS.
6.
Ensure that voltage label on the instrument matches your local supply.
7. This equipment must be earthed any interruption to the mains earth conductor will make the
instrument dangerous.
8. Ensure the unit is placed on a solid level surface.
