BevLes PHC70-32-A, Инструкция по установке и эксплуатации

Страница: 2 / 17

The BevLes Company takes pride in the design and quality of our products. When used as intended and
with proper care and maintenance, you will experience years of reliable operation from this equipment. To
ensure best results, it is important that you read and follow the instructions in this manual carefully.
Installation and start-up should be performed by a qualified installer who thoroughly read, understands and
follows these instruction. If you have questions concerning the installation, operation, maintenance or
service of this product, write Technical Service Department BevLes Company, Inc., 1525 east Lake Rd. Erie,
PA 16511
TABLE OF CONTENTS
ITEM PAGE
Safety Precautions 1
General Information 2
Unpacking Instructions 3
Setting-Up 3
Operation Solid State Thermostat 4
Operation Digital Thermostat 5
Operating Tips 6
Safety and Health 6
Maintenance 6
Assistance/Service 7
Trouble Shooting 7
Additional Information 8
Wiring Diagrams 9,10,11,12
Parts List 13
Warranty 15
SAFETY PRECAUTIONS
Before installing and operating this equipment be sure everyone involved in its operation is fully trained and
aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules and
precautions.
The following words and symbols, found in this manual, alert you to hazards to the operator, service
personnel or the equipment. The words are defined as follows:
DANGER: This symbol warns of imminent hazard which may result in serious injury or death.
WARNING: This symbol refers to a potential hazard or unsafe practice, which could result in
serious injury or death.
CAUTION: This symbol refers to a potential hazard or unsafe practice, which may result in minor or !
moderate injury or product or property damage.
NOTICE: This symbol refers to information that needs special attention or must be fully understood
! even though not dangerous.
THIS MANUAL SHOULD BE RETAINED FOR FUTURE REFERENCE