Beurer UHP 26, Инструкция по эксплуатации

Страница: 7 / 28

7
• Reshape the still damp heating pad to the original size immediately after washing, and dry flat,
spread on a clothes drying rack.
• Do not hang the heating pad up to dry with pegs or similar items. The heating pad may otherwise
be damaged.
Storage
NOTICE
• Let the heating pad cool before putting it away. The heating pad may otherwise be damaged.
• To prevent the heating pad from becoming sharply creased, do not store other objects on top of the
heating pad. The heating pad may otherwise be damaged.
• If you do not intend to use the heating pad for any length of time, store it in the original packaging
in a dry environment and without weighing it down.
• Disconnect the mains connection and the controller from the heating pad to do so.
Disposal
Observe the local regulations for material disposal. Dispose of the device in accordance with local regulations.
If you have any questions, please contact the local authorities responsible for waste disposal.
7� Technical Specifications
Model: UHP 26
Type: U-SP16RX
Heating Pad Size: 12 x 24 in (30.5 x 61 cm)
Power supply: 120 V / 60 Hz
Wattage: 50 W
Pad Material: 100% polyester
Timer: 120 minutes
Temperature levels: 6 levels
Level 0: OFF
Level 1: minimum heat
Level 2-5: medium heat
Level 6: maximum heat
Operating Conditions: 32°F to 95°F (0°C - 35 °C)
< 80% humidity
Storage Conditions: 23°F to 104°F (-5°C to 40°C)
< 80% humidity
8� Troubleshooting Guide
Problem Cause Solution
The heat indicator light is not illuminated while
• The controller is properly connected to the heating
pad.
• The mains plug is connected to the working elec-
trical outlet.
• The sliding switch is set to 1,2,3,4,5 or 6.
The safety system has
switched the heating
pad off permanently.
Send the heating pad
and the controller for
servicing