16
11. “3” flashes on the display
1
. Use the / button
2
4
to set your activity level based on how much you
exercise (considered over the long term). (1 = none, 2 = low, 3 = medium, 4 = high, 5 = very high/athletic).
Confirm your entry with the SET button
3
.
12. “End” appears briefly in the display
1
; then “0.0” with the user symbol. Perform initial measurement (for
subsequent automatic personal recognition if /- 3 kg).
5.4 Weighing yourself
1. Step onto the scale barefoot. Stand still on the electrodes
5
with both legs, making sure to distribute your
weight evenly. The scale switches on automatically.
2. Your body weight appears on the display
1
. The scale user detected (e.g. “U: 1” for scale user 1) should
then appear automatically. If the scale has detected several possible scale users, use the button
4
to
select the correct one and wait 3 seconds. Step off the scale.
3. The following health values will then appear one after the other.
Body mass index (a healthy value is 18.5 - 25)
Body fat percentage (a healthy value is 16 - 28% for women and 11 - 23% for men)
Body water content in % (a healthy value is >45% for women and >50% for men)
Muscle percentage (a healthy value is 27 - 43% for women and 37 - 57% for men)
Note
: For more details of the values, please see the app or the FAQs at
www.beurer.com
4. If a
Bluetooth
®
connection has been established and the user measurements have been successfully taken
(e.g. for U: 1), the values will be transferred to the “beurer HealthManager Pro” app. This is indicated by the
measurement data transfer symbol
10
. If the data cannot be transferred, up to 30 values will be stored per
user. They will be transferred as soon as a connection has been established.
5. The scale switches itself off automatically.
Note:
if the automatic scale user detection function is not working, press the button
4
until your scale user
is displayed, and wait 3 seconds. Then take the diagnostic measurement.
Note:
to display your last diagnostic measurement, briefly press on the scale until “0.0” and the user symbol
appear in the display
1
, press button
4
repeatedly until your scale user is displayed and wait 3 seconds.
Then press the button
2
to display the most recent diagnostic measurement. To display further measure-
ments, press the button
2
again. Up to 30 measurements can be shown on the display
1
.
Note
: If you are wearing shoes when taking the measurement, only your weight will be shown (the weight is
automatically saved when the scale detects the scale user).
5.5 Deleting scale users
You can delete individual scale users in the “beurer HealthManager Pro” app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:
1. Briefly press on the scale until “0.0” appears in the display
1
.
2. Press the SET button
3
3. “Unit” appears in the display
1
, confirm with SET button
3
.
4. “User” appears in display
1
, select your user with button
4
and confirm with SET button
3
.
5. Press and hold the SET button
3
until “End” appears in the display. If you press button
4
within 3 sec-
onds, “dEL” will appear in the display. If you confirm with the SET button
3
, the user is deleted.
