33
Procedure
1. Remove the attachment clip from the speed and distance sen-
sor.
2. Open the battery compartment cover using a suitable coin.
3. Remove the flat battery from the speed and distance sensor.
4. Insert a new battery making sure the polarity is correct and
then close the battery compartment.
5. Press the speed and distance sensor back into the attachment
clip.
Note
•
Take extra care when replacing the battery.
•
When closing the battery compartment, make sure that
the cover is seated correctly so that the Speedbox II
remains watertight.
•
Ignoring these warning instructions may void the war-
ranty.
2.
1.
4.