Beurer HT 50, Инструкция по эксплуатации

Страница: 16 / 64

16 17
Changing attachments
> Press the release button and pull the attachment (e.g. the round brush
[1]) off of the hot air styler.
> Line up the imprinted arrow on the other attachment (e.g. the thermal
brush [2]) with the release button.
> Push the attachment onto the hot air styler until you hear it click into
place.
7. Cleaning and care of the unit
Cleaning
Important
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive, or corrosive cleaning products or hard brushes.
• The casing of the hot air styler and the attachments may be cleaned with a soft cloth dampened
with warm water.
• Before each use, remove any sucked-in fluff, dust or hair from the air outlet [4] and the air intake
filter [8] using an appropriately sized brush.
• If the round brush [1], the heated brush [2] and the nozzle [3] are very dirty, they must be removed
from the device and rinsed thoroughly under running water.
• Carefully dry the round brush [1], the heated brush [2] and the nozzle [3] after cleaning!
• The attachments may only be used again once they have fully dried off.
8. Technical specifications
Weight Approx. 320 g
Power supply 220 - 240 V ~, 50/60 Hz
Power consumption 1000 W
Safety class II
Ambient conditions Only approved for indoor use
Allowable temperature range -10 to +40 °C
Subject to technical modifications.