Beurer BM 93, Инструкция по эксплуатации

Страница: 47 / 232

47
the symbol is shown on the display after the measurement has been taken, repeat the meas-
urement. Please ensure that you rest for 5 minutes beforehand and do not speak or move during
the measurement. If the symbol appears frequently, please consult your doctor. Selfdiagnosis
and treatment based on the measurements can be dangerous. Always follow your GPs instructions.
Risk indicator
The measured values can be classified and evaluated in accordance with the following table.
However, these standard values serve only as a general guideline, as the individual blood pressure
varies in different people and different age groups etc.
It is important to consult your doctor regularly for advice. Your doctor will tell you your individual
values for normal blood pressure as well as the value above which your blood pressure is clas-
sified as dangerous.
The bar chart on the display shows which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different categories (e.g. systole in the ’High normal’
category and diastole in the ’Normal’ category), the graphical classification on the display always
shows the higher category; for the example given this would be ’High normal’.
Blood pressure value category Systole
(in mmHg)
Diastole
(in mmHg)
Action
Level 3: severe hypertension ≥ 180 ≥ 110 seek medical attention
Level 2: moderate hypertension 160 – 179 100 – 109 seek medical attention
Level 1: mild hypertension 140 – 159 90 – 99 regular monitoring by doctor
High normal 130 – 139 85 – 89 regular monitoring by doctor
Normal 120 – 129 80 – 84 self-monitoring
Optimal < 120 < 80 self-monitoring
Source: WHO, 1999 (World Health Organization)
7.6 Saving, displaying and deleting measured values
The device has two user memories. Each user memory can store up to 60 measured values. Once
all memory spaces in a user memory have been used, the oldest measured values are replaced by
the most recent.