21
• Press the
M
button a third time. ’ ’
flashes on the display. The average val-
ue of the evening measurements for the
last seven days is displayed (evening:
6:00 PM – 8:00 PM).
Individual Measured Values:
• Press the
M
button again and the last in-
dividual measurement is displayed.
• To shut the device off, press the Start/
Stop button .
•
You can exit the menu at any time by pressing the
Start/Stop button .
Clearing Memory:
• When an individual stored measurement is dis-
played, press and hold both the
+
and
-
buttons for
five seconds. All values in the selected user mem-
ory will be deleted.
Copying Stored Measurements using
Bluetooth
®
1. Download and install the ‘beurer HealthCoach’
app from your device’s app store. Run the app and
make sure ’BM67’ is selected under ’Settings/My
devices’.
2. Ensure
Bluetooth
®
is activated on your device and
on the blood pressure monitor.
3. Access stored measurements on the unit as de-
scribed in the section ’Displaying and deleting
measurements’.
Bluetooth
®
data transfer should
begin automatically if the two devices are paired
properly.
The ‘beurer HealthCoach’ app must be active to al-
low data transfer.
If your smartphone has a protective cover, remove
this to ensure that there is no interference during the
transfer.
We would explicitly draw attention to the fact that the
software to hand is not a medical product in accord-
ance with EU Directive 93/42/EEC. The values dis-
played are purely for visualisation purposes and must
