15
System requirements for the ‘beurer
HealthCoach‘ app
Bluetooth
®
4.0, iOS from version 8.0, Android
TM
from
version 4.4.
List of compatible devices:
6. Preparing for Measurement
Installing/Replacing Batteries:
If the batteries are depleted and you cannot power the
blood pressure monitor on, you will need to reset the
date, time and
Bluetooth
®
settings after replacing the
batteries. All stored measurements will still be saved.
Slide the battery compartment cover in the direction
of its arrow to remove. Insert four AA alkaline batteries
according to the polarity markings inside the compart-
ment. Reattach battery compartment cover.
Setting the hour format, date, time and
Bluetooth
®
settings:
If date and time are not set, stored measurements will
not have a valid timestamp associated with them.
NOTE:
Press and hold the
+/-
Buttons to advance val-
ues rapidly.
1. If ’
12h
’ is not flashing in the LCD Display, press and
hold the
SET
Button for five seconds.
2. Select an hour format (12 or 24 hour display) with
the
+/-
Buttons and press the SET Button to confirm.
3. The year flashes on the LCD Display. Set the year
with the
+/-
Buttons and press the
SET
Button to
confirm.
4. The month flashes on the LCD Display. Set the
month with the
+/-
Buttons and press the
SET
But-
ton to confirm.
5. The day flashes on the LCD Display. Set the day with
the
+/-
Buttons and press the
SET
Button to confirm.
NOTE:
If the hour format is set to 24h, the day/
month display sequence is reversed.
