Beurer BC 54, Инструкция по эксплуатации

Страница: 18 / 24

18
Error
message
Possible
cause
Solution
The cuff was
not attached
correctly.
Please observe the notes
in chapter "7. Usage"
under the section "Atta-
ching the cuff".
During a new measure-
ment, check whether the
cuff can now be inflated
properly.
4
An error oc-
curred during
measurement.
Please wait one minute
and repeat the measu-
rement.
Ensure that you do not
speak or move during
the measurement.
4
The inflation
pressure is
higher than
300 mmHg or
the measured
blood pressure
is outside the
measuring
range.
4
The batteries
are almost
empty.
Insert new batteries into
the device.
Error
message
Possible
cause
Solution
7
The data could
not be sent via
Bluetooth ®
.
Proceed as described in
chapter „7. Usage“ under
the section
„Transfer via
Blue-
tooth ®
“ into the manual
memory mode and try to
restart the data transfer.
8
A device error
has occurred.
Please repeat the mea-
surement after a pause
of one minute.
If the problems persist despite the proposed corrective
actions, please contact customer service.
10. Disposal
Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper op-
eration can no longer be guaranteed in this case.
• Do not open the device. Failure to comply will result in
voiding of the warranty.
• Repairs must only be carried out by Customer Services
or authorised suppliers. Before making a claim, please
check the batteries first and replace them if necessary.